Author

Pratik Ghate

ORCID Identifier(s)

0000-0003-0313-6184

Graduation Semester and Year

2021

Language

English

Document Type

Dissertation

Degree Name

Doctor of Philosophy in Electrical Engineering

Department

Electrical Engineering

First Advisor

Jonathan Bredow

Second Advisor

Alan Davis

Abstract

A new method is proposed for quasi optical beamforming that will enhance performance of emerging systems such as broad deployment of 5G backhaul communications, Internet of Things (IOT), vehicular networking systems, and unmanned aerial navigation systems. It is a promising approach at higher frequencies to reduce the size, cost and improve efficiency of the beamforming operation. In this investigation candidate lens type structures are designed, studied, and analyzed using different configurations of dielectric wedges, plano-concave lens and dielectric slabs. These structures have cost, power consumption, size, weight, and bandwidth advantages, and are expected to be able to operate to higher frequencies than other beamformers in current use. The proposed structures give sufficient degrees of freedom to control the beamsteering by varying the dielectric constants and geometries of these structures and can form multiple minimally overlapping. This technique is valid for E and H principal planes. Beamforming control with these and other electrically similar types of structures is expected to be achievable with vertical broadside coupled split ring resonators to control the beamsteering angles and beamwidth control. This approach gives sufficient degrees of freedom for steering the beam in E and H principal planes by adjusting the placement of vertical broadside coupled split ring resonators and their arrays. This approach increases the gain of the radiating source resulting in highly directive beams with sufficient degrees of freedom to electronically tune beam properties. Four different geometries are proposed, and performance is demonstrated for quasi- optical beamforming approach. These structures are designed for 1x3 patch antenna to demonstrate the formation of three minimally overlapping beams. Bandwidth enhancement and scanning angle of 180° has been achieved by using vertically oriented dielectric wedge. 6 dB gain enhancement and the capability to scale to somewhat larger arrays has also been demonstrated. Full wave simulations in Ansys HFSS are provided to support the proposed techniques of beamforming using quasi- optical (lens type) structures and validations are done in CST MWS.

Keywords

Beamforming, Beamsteering, Quasi-optical, Antennas

Disciplines

Electrical and Computer Engineering | Engineering

Comments

Degree granted by The University of Texas at Arlington

30064-2.zip (3312 kB)

Share

COinS
 
 

To view the content in your browser, please download Adobe Reader or, alternately,
you may Download the file to your hard drive.

NOTE: The latest versions of Adobe Reader do not support viewing PDF files within Firefox on Mac OS and if you are using a modern (Intel) Mac, there is no official plugin for viewing PDF files within the browser window.