Graduation Semester and Year
2017
Language
English
Document Type
Thesis
Degree Name
Master of Science in Mechanical Engineering
Department
Mechanical and Aerospace Engineering
First Advisor
Robert M Taylor
Abstract
This work investigates the ability of topology optimization methods to design multifunctional components with coupled thermo-structural loading for fabrication with additive manufacturing technologies. Topology Optimization is a mathematical approach developed to perform design optimization with the purpose of reducing material usage, while maximizing the structural and thermal performance, in accordance to specific design constraints. Additive manufacturing provides the capability to create internal structures and complex surfaces developed by topology optimization that would not be possible to produce by conventional manufacturing. The more structurally efficient configuration generated by topology optimization and fabricated with additive manufacturing can result in components with improved structural capability and reduced mass. Design optimization most often follows a single discipline approach in which analysis is carried out either by solving the problem from a structural or a thermal point view, but not both simultaneously. The present work involves the study of combined thermal and structural systems using a multidisciplinary optimization technique to design co-optimal systems. The investigation for this work consists of two case studies: the design of a structural heat conductor and the design of an exhaust-washed structure. For a simple structural heat conductor with various thermal and structural boundary conditions, minimizing compliance is a structural objective whereas minimizing the maximum temperature is a thermal objective, hence carrying out structural analysis on a thermally optimized beam and vice versa. The presence of a thermal load may influence the structural performance by affecting component behavior and vice-versa for structural loading. To overcome this problem, combining both thermal and structural analysis is important. Thus, a systematic 5 study of obtaining a thermal objective using structural constraint and structural objective using a thermal constraint is carried out for the combined system to be co-optimal. Also, the design of aircraft exhaust washed structure has been carried out using a minimum compliance objective.
Keywords
Topology optimization
Disciplines
Aerospace Engineering | Engineering | Mechanical Engineering
License
This work is licensed under a Creative Commons Attribution-NonCommercial-Share Alike 4.0 International License.
Recommended Citation
Gaikwad, Vaibhav Shankar, "AN INVESTIGATION OF TOPOLOGY OPTIMIZATION FOR COUPLED THERMO-STRUCTURAL LOADING FOR ADDITIVE MANUFACTURING" (2017). Mechanical and Aerospace Engineering Theses. 929.
https://mavmatrix.uta.edu/mechaerospace_theses/929
Comments
Degree granted by The University of Texas at Arlington