ORCID Identifier(s)

0000-0001-5469-5547

Graduation Semester and Year

2017

Language

English

Document Type

Thesis

Degree Name

Master of Science in Civil Engineering

Department

Civil Engineering

First Advisor

Yazdani Nur

Abstract

Bearing pads are used as support for bridge girders to transfer the reaction forces to the substructure. They are designed to accommodate high axial loads from girder, shear deformations due to lateral thermal expansion of girder, and rotational deformation. Apart from these deformations bearing pads may also be subjected to thermal stresses due to daily temperature variations and extreme events like fire hazard. Current design methods do not account for these thermally induced stresses in elastomeric bearing pads. The objective of this research is to study the hydrocarbon pool fire performance of elastomeric bearing pad. This research has three parts. The first phase involved hydrocarbon pool fire testing of a full-scale concrete bridge. Following the fire, hardness, shear modulus, compression set, and adhesion strength tests were conducted on the bearing pads as per the ASTM standards. In the second phase, the performance of bearing pads was studied by developing a thermo-mechanical analysis numerical model. Various performance parameters, such as shear strain, hydrostatic tensile strain, and bond stress were studied using linear and nonlinear material models for elastomer. In the third phase, a parametric study was conducted on different grades of bearing pad by exposing it to different temperatures and considering the effect of fillers. All the properties of the bearing pads from the standardized tests with the exception of compression set remained within the limits. From numerical simulations, it is observed that nonlinear material behavior yielded much smaller shear strains at higher compressive loads when compared to linear elastic model and AASHTO (2014) results. From thermo-mechanical analysis, it was found that there will be significant thermal strains induced in elastomer when its temperature raises. However, it depends on many factors as magnitude of applied compressive stress, grade of elastomer and temperature. Increases of 74 %, 115 %, and 106 % in shear strain, hydrostatic tensile stress and bond stress, respectively, can be expected due to fire exposure for all grades of bearing pads, based on the level of applied compressive stress. Temperature has less contribution to shear strains beyond 50°C because of low thermal conductivity and high specific heat of elastomer, insulating interior parts of elastomer to external changes in temperature.

Keywords

Elastomeric bearing pads, Hydrocarbon pool fire, Parametric study, Bridge fire, Numerical modeling

Disciplines

Civil and Environmental Engineering | Civil Engineering | Engineering

Comments

Degree granted by The University of Texas at Arlington

26960-2.zip (4171 kB)

Share

COinS
 
 

To view the content in your browser, please download Adobe Reader or, alternately,
you may Download the file to your hard drive.

NOTE: The latest versions of Adobe Reader do not support viewing PDF files within Firefox on Mac OS and if you are using a modern (Intel) Mac, there is no official plugin for viewing PDF files within the browser window.