Graduation Semester and Year
2017
Language
English
Document Type
Thesis
Degree Name
Master of Science in Civil Engineering
Department
Civil Engineering
First Advisor
Shih-Ho Chao
Abstract
A recent investigation of a crane system began when a facilities manager reported a runway beam under-going torsional vibration during operations. The investigation revealed the runway beam’s twisting was caused by resonance vibration due to “inching” of the crane hoist. A Fourier spectrum analysis revealed that one of the harmonic frequencies of this rhythmical motion coincided very close to the natural frequency of the crane system. The runway beam, although met strength requirements, failed to meet serviceability criteria due to the resonance vibration. Resonance vibration issues due to human activity in crane operation (inching, sway, etc.) is often encountered by engineers when designing crane runways. These issues are even more familiar in long-span crane runways where limited bracing opportunities exist. While vibration resonance issues, of all modes, may be known to many designers of crane structures, the time required to run an in-depth dynamic analysis is usually not economical for such a simple structure. Possible critical vibration issues coupled with the inability to perform an in-depth analysis requires design engineers to use very conservative design recommendations regarding vibration. The few design recommendations found in current standards are very broad and offer little-to-no commentary, and the application of such design recommendations may or may not support a critical vibration mode. The resulting overdesign may reinforce a vibrational mode which is not necessarily an object of concern. The cost associated with the overdesign could have possibly been directed towards a more vibrational sensitive mode. This study first investigated the cause of the resonance vibration. Secondly, through extensive finite element analyses (FEA), a practical solution is recommended. Lastly, using the FEA results, alongside current standards, a set of design equations are formulated to aid in future crane runway vibration design in addition to the limited vibration research.
Keywords
Crane, Runway, Torsion, Vibration
Disciplines
Civil and Environmental Engineering | Civil Engineering | Engineering
License
This work is licensed under a Creative Commons Attribution-NonCommercial-Share Alike 4.0 International License.
Recommended Citation
Lorance, Dustin C., "INVESTIGATION AND PROPOSED REMEDY OF VIBRATION PROBLEM IN INDUSTRIAL CRANE SYSTEM DUE TO HUMAN OPERATION" (2017). Civil Engineering Theses. 366.
https://mavmatrix.uta.edu/civilengineering_theses/366
Comments
Degree granted by The University of Texas at Arlington