Graduation Semester and Year
2018
Language
English
Document Type
Thesis
Degree Name
Master of Science in Civil Engineering
Department
Civil Engineering
First Advisor
Nur Yazdani
Abstract
CFRP (Carbon Fiber Reinforced Polymer) laminates have been used as externally bonded reinforcements for retrofitting and structural strengthening of concrete structures. The adequacy of the CFRP bonding highly depends on the bond integrity between the concrete and CFRP laminates. Considering the reliability of this bonding technique, premature debonding of laminates from the concrete substrate is a major concern. The bond performance may be influenced directly by various parameters; some of the parameters like surface wetness, surface preparation, presence of voids in concrete substrate and overhead versus on the top installation of CFRP laminate have been discussed in this study. During the installation of the composite system, the bond can be comprised due to poor workmanship or unsuitable environmental conditions; improper cure or installation or surface preparation can cause voids, inclusions, debonds and delamination at the CFRP-substrate level. In this study, assessment of the CFRP-concrete bond for beams strengthened in flexure was carried out. Non-Destructive evaluation methods using Ground Penetrating RADAR, Ultrasound Tomography, Thermography and Schmidt hammer were applied to detect possible disbonds between CFRP-Concrete interfaces. Ground Penetration RADAR was effective in finding the sub-surface defects that affect the bond quality, infrared thermography and ultrasound tomography could detect both surface and subsurface delamination. Further, destructive techniques were executed to determine the type of failure in the CFRP retrofitted beams to correlate it with the quality of the bond. This study may serve as a valuable reference for optimization and inspection of CFRP-Concrete bond at the interface, using Non-destructive testing devices for practical applications.
Keywords
CFRP-concrete bond, Non-destructive testing, Delamination, Disbond, Thermography, Ground penetrating radar, Ultrasonic tomography
Disciplines
Civil and Environmental Engineering | Civil Engineering | Engineering
License
This work is licensed under a Creative Commons Attribution-NonCommercial-Share Alike 4.0 International License.
Recommended Citation
Lad, Ankita Anil, "QUALITATIVE EVALUATION OF CFRP-CONCRETE BOND USING NON-DESTRUCTIVE AND DESTRUCTIVE TESTING METHODS" (2018). Civil Engineering Theses. 397.
https://mavmatrix.uta.edu/civilengineering_theses/397
Comments
Degree granted by The University of Texas at Arlington