Graduation Semester and Year
2021
Language
English
Document Type
Dissertation
Degree Name
Doctor of Philosophy in Civil Engineering
Department
Civil Engineering
First Advisor
Suyun Ham
Abstract
This dissertation presents the automated damage assessment studies for concrete structure. Three major studies are performed to: 1) understand the theoretical wave scattering model to evaluate the internal vertical crack, 2) to validate the theoretical wave scattering model through FE simulations with experimental measurements, and 3) to advance practical automated crack evaluation (ACE) system for vertical crack and delamination detection. Firstly, singular integral solutions are studied to investigate scattering of Rayleigh waves by subsurface cracks. Defining a wave scattering model by objects, such as cracks, still can be quite a challenge. The model’s analytical solution uses five different numerical integration methods: (1) the Gauss–Legendre quadrature, (2) the Gauss–Chebyshev quadrature, (3) the Gauss–Jacobi quadrature, (4) the Gauss–Hermite quadrature and (5) the Gauss–Laguerre quadrature. The study also provides an efficient dynamic finite element analysis to demonstrate the viability of the wave scattering model with an optimized model configuration for wave separation. The obtained analytical solutions are verified with displacement variation curves from the computational simulation by defining the correlation of the results. A novel, verified model, is proposed to provide variations in the backward and forward scattered surface wave displacements calculated by different frequencies and geometrical crack parameters. The analytical model can be solved by the Gauss–Legendre quadrature method, which shows the significantly correlated displacement variation with the FE simulation result. Ultimately, the reliable analytic model can provide an efficient approach to solving the parametric relationship of wave scattering. Secondly, the analytical model of internal vertical crack is validated through comparison with parametric studies based on dynamic finite element (FE) simulations and experimental measurement. The results of the study allow to demonstrate crack depth estimation understanding response variation curves, which are the wave response ratio of scattering waves to incident waves according to specific wave frequency and crack geometry. In addition, the study advances the crack evaluation based on the SWS-IVC model leveraging relative wave energy attenuation obtained from arrayed air-coupled MEMS sensors. Finally, the ACE system is proposed, developed and demonstrated for the rapid bridge deck inspection. The inspection includes detection of delamination, vertical crack, and corroded reinforcement by using flexural vibration mode of impact-echo testing, wave attenuation, and GPR, respectively. The ACE system has novelty in three main techniques: the advanced auto-impacting system, high-speed integrated scanning platform, and high-resolution data collecting system. The advanced auto-impacting system is validated through laboratory tests considering many parameters. Two field bridge inspection are performed with the developed ACE system. The 2-D interpolation colormaps present area of the delamination, vertical crack, and reinforcement corrosion.
Keywords
Automated crack evaluation, Concrete structures, Nondestructive testings, Wave scatterings
Disciplines
Civil and Environmental Engineering | Civil Engineering | Engineering
License
This work is licensed under a Creative Commons Attribution-NonCommercial-Share Alike 4.0 International License.
Recommended Citation
Kang, Sanggoo, "AN ANALYTICAL, NUMERICAL, AND EXPERIMENTAL STUDY OF AUTOMATED DAMAGE ASSESSMENT FOR CONCRETE STRUCTURES" (2021). Civil Engineering Dissertations. 470.
https://mavmatrix.uta.edu/civilengineering_dissertations/470
Comments
Degree granted by The University of Texas at Arlington